Probe Pusher

Strong, compact, and light in the same package.

Small Footprint

Probot is a powerful, highly advanced, compact, and light probe pusher system. It is easy to transport and set up, has a small footprint, and offers the robustness required by the industry.

One-Person Operation

Probot makes one-person inspection a reality — users can benefit from a significant competitive edge with this production-oriented probe pusher system. Probot can dramatically and safely increase inspection speed, while maintaining high-quality results.

Versatility and Power

Probot is designed with versatility in mind, exceeding the requirements of BoP inspections, while offering other markets an extraordinary productivity-enhancing tool. By automating probe motion during heat exchanger inspection, the system always yields accurate and reliable data at speeds optimized for the technique.

Probot Remote Control

Probot probe gun

Probot is compatible with industry-standard probes and is fully integrated into Eddyfi’s product lineup. The probe pusher system is designed to enhance the operation of our most innovative tubing probes. Configure and control the Probot with Magnifi, the most advanced multi-technology software for tube inspections. Use it with TubePro for better results and reports. Adding the Ectane test instrument to the mix creates the most powerful heat exchanger inspection system on the market.



  • Drive without belts or protective covers: 22.3 kg (49 lb)
  • Drive: 23.6 kg (52 lb)
  • Take-up reel: 6.4 kg (14 lb)

Dimensions (W×H×D)

  • Drive: 307×277×554 mm (12.1×10.9×21.8 in)
  • Drive and take-up reel: 361×521×940 mm (14.2×20.5×37.0 in)

Operating temperature

0–45ºC (32–113ºF)

IP rating

Designed for IP65

Speed range

0–2.5 m/s (0–100 in/s)

Wide range of speeds to accommodate various inspection techniques

Push force

  • Peak: 445 N (100 lbf)
  • Continuous: 245 N (55 lbf)

Supported poly sizes

  • 9.53 mm (3/8 in)
  • 7.94 mm (5/16 in)
  • 6.35 mm (1/4 in) — optional belt required

Supported probe diameters

7–23 mm (0.276–0.906 in)

Spool outer diameter

406.4 mm (16 in)

Spool capacity

33.5 m (9.53 mm tubing)
[110 ft (3/8 in tubing)]

Encoder resolution

18.796 counts/mm (477.406 counts/in)

AC input voltage

  • 110–120 V / 220–240 V
  • 50–60 Hz

*Not compatible with every GFI/GFCI types.