Pulsed Eddy Current Array (PECA™) High-Resolution Probe

Eddyfi offers a variety of pulsed eddy current (PEC) and pulsed eddy current array (PECA™) probes to meet the toughest challenges of your inspections.

The patent-pending high-resolution PECA™ probe is part of a complete solution dedicated to providing the best estimate of remaining wall thickness over surface-forming scabs and corrosion blisters.

Using an array of dual sensors capable of spatial triangulation, the probe enables the detection of the smallest possible defects with Pulsed Eddy Current (PEC) technology, within an adequate range of wall thickness and liftoff. With 75 mm (3 in) of coverage and encoded dynamic-scanning, typical scabs can be inspected in less than 1 minute! The array design generates clean and compelling C-scans. The novel probe, combined with advanced real-time processing, a dedicated scab mode and a new scab mat, provides top-quality data at unrivalled speed. It supports metal thickness 3-19 mm (0.12-0.75 in) and liftoff 0-50 mm (0-2 in).

Check out the video introducing the new complete solution:

 

The most reliable option for scab corrosion assessment

Since the PECA HR solution does not require surface preparation, the assessment of the remaining ligament can be performed while the asset is in service. Moreover, the technique provides 100% coverage, and does not use radiation for a safe work environment.

 

Specifications

Casing

Small

Number of channels

6
3 patent pending dual sensors

Total coverage

75 mm (3 in)

Wall thickness

3–19 mm (0.12–0.75 in)

Insulation/Coating thickness (liftoff)

0–50 mm (0–2 in)

Weather jacket thickness

Not supported

Outer diameter range

152 mm (6-in) to flat surfaces

Encoder

16.04 counts/mm (407.44 counts/in)

Cable

5 m (16.4 ft)