Vidéos

YouTube en direct (pauses café)

• Exclusif

  Coffee Break | The Power of Cypher®

• Exclusif

  Coffee Break | Introducing WeldXprt™️

• Exclusif

  Coffee Break | How to Identify Tubing Defect Progression Between Inspections

• Exclusif

  Coffee Break | How Modular Robotics Empower Custom Inspection Solutions

• Exclusif

  Coffee Break | Orbital Weld Inspection with Eddy Current Array

• Exclusif

  Coffee Break | Enhancing PoD & Sizing Accuracy When Inspecting Complex Shapes

• Exclusif

  Coffee Break | Sonyks GWT: From Setup to Single-Location Inspection Results

• Exclusif

  Coffee Break | Meet the Detection Duo for SCC & Corrosion

• Exclusif

  Coffee Break | TubePro™️6: Boosting Report Efficiency and Standardization

• Exclusif

  Coffee Break | Unleashing the Power of Robotics with VersaTrax™ OnSpec

• Exclusif

  Coffee Break | Introducing TubePro 6.0 for Efficient, Consistent and Insightful Tubing Reports

• Exclusif

  Coffee Break | Corrosion Mapping: Reducing the Risk

• Exclusif

  Coffee Break | The Trusted Tech Stack for HTHA Detection

• Exclusif

  Coffee Break - Sneak Peek: The power of UltraVision for Capture and Acquire data

• Exclusif

  Coffee Break - Spyne & SIMS PRO ECA - Building a complete inspection report

• Exclusif

  Coffee Break with Eddyfi - Capture 4.1: The complete TFM/PCI toolbox

• Exclusif

  Coffee Break with Eddyfi - PWI: High Speed, Highly Focused UT Inspection

• Exclusif

  Coffee Break - Introduction to the new Ectane® 3 with Remote-Field Array (RFA) technology

• Exclusif

  Coffee Break with Eddyfi - Phase Coherence Imaging (PCI) : pros and cons

• Exclusif

  Coffee Break - Inspection of carbon steel welds with Sharck

• Exclusif

  Coffee Break - Advanced Focusing Techniques For Stainless Steel And Dissimilar Metal Welds

• Exclusif

  Coffee Break en *FRANÇAIS* - ACFM: Nos derniers développements sur des applications clés

• Exclusif

  Coffee Break - Breakthrough in steel infrastructure inspection: ACFM vs. conductive coatings

• Exclusif

  Coffee Break with Eddyfi - ACFM software developments and their demonstration

• Exclusif

  Coffee Break with Eddyfi - PEC Advanced Analysis - Ship Deck Inspection

• Exclusif

  Coffee Break with Eddyfi – Boost productivity with new analysis tools in Magnifi 5.0

• Exclusif

  Coffee Break with Eddyfi - Solutions for CUPS

• Exclusif

  Coffee Break with Eddyfi: Assisted Analysis of butt weld phased-array inspections

• Exclusif

  Coffee Break with Eddyfi: Time Reversal - Simple inspection of varying geometries

• Exclusif

  Coffee Break with Eddyfi: Reformer furnace inspection challenges - Eddy Current Array

• Exclusif

  Coffee Break with Eddyfi: Electric Resistant Welded Pipe inspection using PAUT and TFM

• Exclusif

  Coffee Break with Eddyfi: LYNCS, a non-expert's overview of a simple product!

• Exclusif

  Coffee Break with Eddyfi - Precise and optimal tubing data acquisition with Eddyfi’s Probot

• Exclusif

  Coffee Break with Eddyfi - Presentation of the ElbowFlex scanner

• Exclusif

  Coffee Break with Eddyfi - NDT Paintbrush: Corrosion Inspection Solution

• Exclusif

  Coffee Break with Eddyfi - ACFM Applications with the Amigo2 SE

• Exclusif

  Coffee Break with Eddyfi - TOPAZ: Instrument Family Overview

• Exclusif

  Coffee Break with Eddyfi - Sonyks: A Human Centered Design

• Exclusif

  Coffee Break with Eddyfi - Applications of Pulsed Eddy Current for the Power Generation Industry

• Exclusif

  Coffee Break - Capture 3.4 new feature: weld overlay for nozzles and nodes

• Exclusif

  Coffee Break with Eddyfi (Spanish) - Inspeccion de Soldadura con TFM

• Exclusif

  Coffee Break with Eddyfi - Using eddy current array to inspect aircraft components

• Exclusif

  Coffee Break - High temperature ACFM inspection with LIVE action demo

• Exclusif

  Coffee Break with Eddyfi - Live Product Unveiling at ASNT

• Exclusif

  Coffee Break with Eddyfi - Inspection crawlers, an essential part of your toolkit

• Exclusif

  Coffee Break with Eddyfi - Stainless steel inspection using Capture

• Exclusif

  Coffee Break with Eddyfi - PEC Advanced Analysis - Increase inspection confidence

• Exclusif

  Coffee Break with Eddyfi - New 2D CAD file component with Capture 3.3

• Exclusif

  Coffee Break with Eddyfi - Remote robotics - Phased Array Corrosion Mapping

• Exclusif

  Coffee Break with Eddyfi - Intro to TubePro 5.5

• Exclusif

  Coffee Break - Ask us Anything Session - Robotics

• Exclusif

  Coffee Break - Ask us Anything Session

• Exclusif

  Coffee Break with Eddyfi - Fin Fan air coolers: Bring efficiency and confidence to your inspection

• Exclusif

  Coffee Break with Eddyfi - How to have it all - better information leads to better decision making

• Exclusif

  Coffee Break with Eddyfi - Magnifi Tips & Tricks

• Exclusif

  Coffee Break with Eddyfi - Crack characterization for TFM using indirect modes

• Exclusif

  Coffee Break with Eddyfi - Lift-off management & far side inspection

• Exclusif

  Coffee Break with Eddyfi - Advantages of TFM for Stress Corrosion Cracking

• Exclusif

  Coffee Break with Eddyfi - Sharck HR: A unique ECA solution for crack assessment on pipelines

• Exclusif

  Coffee Break with Eddyfi - The Evolution of Guided Wave Training

• Exclusif

  Coffee Break with Eddyfi | LYNCS to scan axial welds

• Exclusif

  Pause-café avec Eddyfi | Inspection de soudures à l’aide d’une configuration multigroupes TFM

• Exclusif

  Coffee Break with Eddyfi - Welds Month | Revealing fatigue cracks in structural welds using ACFM

• Exclusif

  Coffee Break with Eddyfi | How the Naval market can maximize your Lyft PEC system usage

• Exclusif

  Coffee Break with Eddyfi | First look at the new 5.5 version of TubePro

• Exclusif

  Coffee Break with Eddyfi | Long range crawler inspection - getting on target

• Exclusif

  Coffee Break with Eddyfi | Changing the way we deliver NDT knowledge

• Exclusif

  Coffee Break with Eddyfi | Weld inspection using multi-group TFM with Gekko and Lyncs

• Exclusif

  Coffee Break with Eddyfi | Eyes can’t see through concrete, Lyft can

• Exclusif

  Coffee Break with Eddyfi | Setting the Standard with Custom Robotic Inspection Solutions

• Exclusif

  Coffee Break with Eddyfi | Simply Versatile - Phased Array Corrosion Mapping

• Exclusif

  Coffee Break with Eddyfi | Simple steps for an optimal ECA inspection

• Exclusif

  Coffee Break with Eddyfi | Weld inspection using multi-group TFM and the Panther

• Exclusif

  Coffee Break with Eddyfi | Inspection Solutions for Wind Turbine Towers and Blades

• Exclusif

  Coffee Break with Eddyfi | Boost the productivity of your tubing inspections

• Exclusif

  Coffee Break with Eddyfi | Qualify Before You Quantify

• Exclusif

  Coffee Break with Eddyfi Keep it Simple Inuktun Robotics

• Exclusif

  Coffee Break with Eddyfi | Inspect, Analyze, Report and Go Capture 3.1

• Exclusif

  Coffee Break with Eddyfi | Chillers: NDT is making sure they're not failing when the heat is on

• Exclusif

  Coffee Break with Eddyfi | Handling dual phased-array probes with GEKKO

• Exclusif

  Coffee Break with Eddyfi | Calibration and signal rotation made easy with Magnifi 4.7

• Exclusif

  Coffee Break with Eddyfi | The Basics of the Total Focusing Method (TFM)

• Exclusif

  Coffee Break with Eddyfi | Remote Crawler inspections for tanks, vessels and pipes

• Exclusif

  Coffee Break with Eddyfi | PAUT, TFM and PWI comparison with a PANTHER system

• Exclusif

  Coffee Break with Eddyfi | 5 Secrets to Be a PRO at PEC Reporting

• Exclusif

  Coffee Break with Eddyfi | TKY Weld Inspection using Capture

• Exclusif

  Coffee Break with Eddyfi | Offline MFL Analysis for Tank Floor Inspection

• Exclusif

  Coffee Break with Eddyfi | Nozzle inspection using M2M instruments

• Exclusif

  Coffee Break with Eddyfi | Time-Of-Flight Diffraction (TOFD) with Capture on the Gekko

• Exclusif

  Coffee Break with Eddyfi | Tank Floor MFL Data: Using SIMS for Better Reports, Better Decisions

• Exclusif

  Coffee Break with Eddyfi | The Eddyfi Recipe – Software Quality Behind The Scenes

• Exclusif

  Coffee Break with Eddyfi | The wizards of Capture™ software

• Exclusif

  Coffee Break with Eddyfi | How inspection robotics play a part in sewer line integrity

• Exclusif

  Coffee Break with Eddyfi | How to define a scan plan for a PWI/TFM configuration

• Exclusif

  Coffee Break with Eddyfi | Corrosion inspection : Inspect, detect, characterize

• Exclusif

  Coffee Break with Eddyfi | Inspection of stainless steel and detection of localized hardening

• Exclusif

  Coffee Break with Eddyfi | Data analysis and post-processing of PWI/TFM data

• Exclusif

  Coffee Break with Eddyfi | Walk-through of a basic bobbin setup in Magnifi

• Exclusif

  Coffee Break with Eddyfi | Nozzle inspection using Capture feature and 3 axis scanner

• Exclusif

  Coffee Break with Eddyfi | The new PHMSA Guided Wave requirements for gas pipeline inspection

• Exclusif

  Coffee Break with Eddyfi | Ultrasonic inspection of High-density polyethylene using TOFD and PAUT

• Exclusif

  Coffee Break with Eddyfi | Introducing the Pinnacle of ACFM

• Exclusif

  Coffee Break with Eddyfi | Reddy AC/E: Taking ECT tubing inspections anywhere

• Exclusif

  Coffee Break with Eddyfi | Longitudinal weld inspection using Capture

• Exclusif

  Coffee Break with Eddyfi | Corrosion Mapping from a distance